ایس ڈی سی مٹیریلز کہتا ہے کہ اخراج سے احکامات کی بڑھتی ہوئی تکمیل عمل انگیز ٹیکنالوجی اختیار کرنے کو تحریک دے گی

-اعلیٰ کارکردگی عمل انگیز مواد تیار کرنے والا اخراج پر قابو پانے کے نظاموں میں جدت کو زیادہ اہم تبدیلیوں کے نقطہ آغاز کے طور پر دیکھتا ہے

-ایس ڈی سی کے نینو-آن-نینو ٹ م عمل انگیز مواد مہنگی پلاٹینم-گروپ دھاتوں کی کھپت پر آنے والے اخراجات کو نصف کرتے ہیں

-ابھرتی ہوئی ٹیکنالوجیاں عمل انگیز اور انجن ڈیزائنروں کے لیے اخراجات، ایندھن موثریت اور کارکردگی کے ساتھ اخراج پر قابو پانے کو متوازن بنانے کے کئی امکانات پیش کرتی ہیں

ٹمپے، ایریزونا، 28 اکتوبر 2015ء/پی آرنیوزوائر/–

Revolutionizing Materials Engineering

لوگو – http://photos.prnewswire.com/prnh/20140922/147665

گاڑیوں کے لیے اعلیٰ کارکردگی کے عمل انگیز مواد بنانے والے امریکی ادارے ایس ڈی سی مٹیریلز نے آج کہا ہے کہ اخراج سے مطابقت پر انتظامی جانچ کو بڑھانا بالآخر عمل انگیز ٹیکنالوجی میں بہتریوں کو تحریک دے گا۔ ایس ڈی سی ایگزیکٹو چیئرمین ولیم اسٹیرون نے اس معاملے میں مندرجہ ذیل بیان جاری کیا ہے تاکہ اخراج پر قابو پانے کے سے قبل آنے والی جدتوں کا پس منظر فراہم کیا جائے:

“آج کی سرخیاں قانونی تقاضے پورے نہ کرنے سے بھری پڑی ہیں۔یہ اخراج پر قابو پانے کے نظام کی قابلیت کا معاملہ نہیں؛ لیکن توجہ ماحولیاتی عملدرآمد پر سختی اختیار کرنے کو بڑھاوا دے گی جو ابھرتی ہوئی ٹیکنالوجیز کو تحریک عطا کرے گی۔

“ایس ڈی سی میں ہم اخراج کی کمی میں استعمال ہونے والے بنیادی، اور انتہائی مہنگے، متحرک اجزاء کی موثریت کو کافی حد تک بہتر بنانے میں کامیابی حاصل کرچکے ہیں۔ خاص طور پر ایس ڈی سی کا پیٹنٹ یافتہ نینو-آن-نینو ٹ م نسخہ، جسے ایگزاسٹ بعد از-انتظام عمل انگیزوں میں روایتی عمل انگیز کے مقابلے میں پلاٹینم گروپ کی صرف نصف دھاتوں کی ضرورت ہوتی ہے۔ ہمارے ملکیتی عمل انگیز سفوف سخت داخلی، او ای ایم اور آزاد جانچ سے مشروط ہیں؛ اور اب تک ان کے نتائج 2016ء کے اوائل کے لیے کمرشلائزیشن کی توقعات کو مضبوط کر چکے ہیں۔

“گاڑیوں کے روایتی عمل انگیز ٹیکنالوجی کا ایک شاہکار ہیں، جو چار دہائیوں سے زائد کے تجربات کا مقابلہ کررہے ہیں۔ کئی مرتبہ پیشرفت کے بعد باوجود بنیادی ‘گیلی’ کیمیائی بناوٹ عمل انگیز سطح کو بدستور غیر تبدیل شدہ رکھتی ہے۔ عمل انگیز ڈیزائن میں ایک نئی کیمیائی بناوٹ کا اب بہترین وقت ہے – تاکہ گاڑیں کی صنعت کو سخت ہوتے ضوابط، انجن ڈیزائن میں بڑھتی ہوئی پیچیدگی اور اخراجات کو کم کرنے کے لیے لامحدود دباؤ کے چیلنجز سے نمٹنے میں مدد دی جائے۔

اضافی پس منظر

ایس ڈی سی کے پیٹنٹ یافتہ مواد عمل انگیز اور انجن ڈیزائنرز کے لیے نئے انتخابات کی راہ کھولتے ہیں– چاہے وہ نصف قیمت پر وہی عمل انگیز کارکردگی ہو یا اسی خرچ پر کارکردگی کو بہتر بنانا ہو۔ ایسی جدت طرازی گاڑی بنانے والے اداروں کو اخراج پر قابو، ایندھن موثریت، کارکردگی اور اخراجات کو متوازن بنانے میں مدد دے رہی ہے – جو روایتی طور پر انجن ڈیزائن کرنے میں یکساں مقاصد ہیں۔

اگلی دہائی میں یہ ہلکا سا توازن کہیں زیادہ چیلنج کا حامل ہوجائے گا کیونکہ بنانے والے کاربن میں کمی اور ایندھن معیشت کے سخت ہوتے عالمی معیارات پر پورا اترنے کے لیے جدوجہد کریں گے۔ مسافر گاڑیاں اور چھوٹے ٹرک بنانے والے امریکی اداروں کو 2025ء تک اوسط ایندھن معیشت میں 54.4 میل فی گیلن حاصل کرنے کی ضرورت ہوگی۔ ایسی کارکردگی کے حصول کے لیے انجن کارکردگی اور ایگزاسٹ بعد از انتظام میں جدت طرازی کی نئی لہر کی ضرورت ہوگی۔

ایس ڈی سی مٹیریلز انکارپوریٹڈ کے بارے میں

ایس ڈی سی مٹیریلز اعلیٰ خوبیاں رکھنے والے جدید عمل انگیز مادوں کو تیار اور تجارتی پیمانے پر پیش کرتا ہے جن کی بنیاد نادر مادوں کی بناوٹ اور تکمیل کے پلیٹ فارم ہے۔ ادارہ 2004ء میں قائم ہوا جس کے صدر دفاتر اور آر اینڈ ڈی مرکز ٹمپے، ایریزونا، امریکہ میں ہے۔یہ شوارزیڈے، جرمنی میں بھی پیداواری تنصیبات کی ملکیت رکھتا اور چلاتا ہے۔

ایس ڈی سی کے سرمایہ کاروں میں جنرل موٹرز، وولوو گروپ اور چین کے سب سے بڑے گاڑیاں بنانے والے ادارے ایس اے آئی سی موٹر کارپوریشن کے وینچر کیپٹل شعبہ جات کے ساتھ ساتھ کلین ٹیک وینچر کیپٹل میں رہنما ادارہ ایمیرالڈ ٹیکنالوجی پارٹنرز اور انوَس فنانشل ایڈوائزرز شامل ہیں۔ مزید معلومات کے لیے ملاحظہ کیجیے http://www.sdcmaterials.com۔

رابطہ برائے ذرائع ابلاغ:
سین ہیلی
ہیلی کارپوریٹ کمیونی کیشنز
+1-201-857-2520یا +1-201-218-2039/سیل
sean@healycorp.com

SDCmaterials says Heightened Scrutiny on Emissions Compliance will Drive Adoption of Emerging Catalyst Technology

Manufacturer of high-performance catalyst materials sees tipping point in advancement of emission-control systems

SDC’s Nano-on-Nano™ catalytic materials cut consumption of costly platinum-group metals in half

Emerging technologies offer more options for catalyst and engine designers in balancing emissions control with cost, fuel efficiency, and performance

TEMPE, Arizona, Oct. 28, 2015 /PRNewswire/ —

Logo – http://photos.prnewswire.com/prnh/20140922/147665

SDCmaterials, a U.S. manufacturer of high-performance automotive catalytic materials, today said the heightened regulatory scrutiny on emissions compliance will inevitably drive advances in catalyst technology. SDC Executive Chairman William Staron issued the following statement as context on the issue and to provide background on innovations coming to the fore in emissions control:

“Today’s headlines are being driven by overt non-compliance. This is not an issue of emissions-control system capabilities; the attention, however, will inevitably accelerate the adoption of stricter environmental enforcement, which will drive emerging technologies.

“At SDC, we have created a breakthrough that substantially improves the efficacy of the primary, and most expensive, active ingredient used in emissions abatement. Specifically, SDC’s patented Nano-on-Nano™ formulation, which, when used in exhaust after-treatment catalysts, requires just half the amount of platinum group metals compared to traditional catalysts. Our proprietary catalytic powders have been subjected to rigorous internal, OEM, and independent testing; and results to date have reinforced expectations for early 2016 commercialization.

“The conventional automotive catalyst is a technological marvel, having withstood the test of time for more than four decades. Despite its many advances, the use of basic ‘wet’ chemical composition in making the catalytic layer has remained virtually unchanged. The time is right for a new chemical composition in catalyst design – to help the auto industry meet the myriad challenges presented by an unprecedented confluence of rising regulation, growing complexity in engine design, and never-ending pressures to cut costs.”

Additional Background
SDC’s patented materials open an array of new options for catalyst and engine designers – whether it’s to deliver the same catalytic performance at half the cost or to improve the catalytic performance at the same cost. Such innovations will be essential in helping automakers balance emissions control, fuel efficiency, performance, and cost – which typically are competing objectives in engine design.

This delicate balance will become even more challenging over the next decade as manufacturers strive to comply with increasingly stringent standards globally in carbon reduction and fuel economy. U.S. manufacturers of passenger cars and light trucks will be required to achieve 54.5 miles per gallon in sales-weighted average fuel economy by 2025. To achieve this type of performance, a new wave of engine performance and exhaust after-treatment innovation will be required.

About SDCmaterials, Inc.
SDCmaterials develops and commercializes advanced catalyst products based on their novel materials fabrication and integration platform. Founded in 2004, the company’s headquarters and R&D center are in Tempe, Arizona. It also owns and operates a production facility in Schwarzheide, Germany.

SDC’s investors include the venture capital arms of General Motors, Volvo Group, and SAIC Motor Corp., China’s largest automaker, as well as Emerald Technology Partners, a leader in cleantech venture capital; and Invus Financial Advisors. For more information, visit http://www.sdcmaterials.com.

Media contact:
Sean Healy
Healy Corporate Communications
+1-201-857-2520 or +1-201-218-2039/cell
sean@healycorp.com

Financial results of Noon Pakistan Limited for period ended September 30, 2015

Karachi: Noon Pakistan Limited informed Karachi Stock Exchange about recommendations made by the board of directors in the meeting held at Rawalpindi on October 27, 2015.

The agenda of the meeting was discussion of un-audited interim profit and loss account for Quarter ended September 30, 2015 which portrayed a loss of Rs. 72,791,146 and earnings per share 2.32 basic and diluted.

Further, nil payment of cash dividend, bonus shares and right shares was agreed.

Board meeting of Wah noble Chemicals Limited will be held on November 03, 2015

Karachi: Wah noble Chemicals Limited informed Karachi Stock Exchange that board of directors meeting of the company will be held on November 03, 2015 at Wah Cantt. The agenda of the meeting is to consider and approve annual audited accounts of the Company for financial year ended June 30, 2015 and also consider and approve first Quarterly unaudited accounts of the Company for quarter ended September 30, 2015.

Further, the Company has declared the closed period from October 27, 2015 to November 03, 2015.

Financial results of Dadex Eternit Limited for period ended September 30, 2015

Karachi: Dadex Eternit Limited informed Karachi Stock Exchange about recommendations made by the board of directors in the meeting held at Karachi on October 27, 2015.

The agenda of the meeting was discussion of un-audited interim profit and loss account for Quarter ended September 30, 2015 which portrayed a profit of Rs. 3,115 and earnings per share 0.29 basic and diluted.

Further, nil payment of cash dividend, bonus shares and right shares was agreed.

Dadex Eternit Limited is a limited liability company incorporated in Pakistan on April 13, 1959 as a public limited company under the Companies Ordinance, 1984. Sikander Private Limited is the holding company which represents 63.18% shares of the company. The principal business activities of the company include manufacturing and sale of construction material which includes piping systems and other allied products manufactured from chrysotile cement, rubber and plastics, merchandising of imported pipe fittings, accessories and other building products. The shares of the company are quoted on the Karachi Stock Exchange of Pakistan. The registered office of the company is located in Karachi. The company operates with three factories located Karachi, Hyderabad and Lahore.

The company has a rubber plant located within Karachi which produces rubber rings to meet the international standards. Besides this the company is also associated with providing irrigation solutions for agriculture and landscaping.

The symbol “DADX” is being used by the stock exchanges for the shares of Dadex Eternit Limited.

Financial results of Dynea Pakistan Limited for period ended September 30, 2015

Karachi: Dynea Pakistan Limited informed Karachi Stock Exchange about recommendations made by the board of directors in the meeting held at Karachi on October 27, 2015.

The agenda of the meeting was discussion of un-audited interim profit and loss account for Quarter ended September 30, 2015 which portrayed a profit of Rs. 6,033 and earnings per share 0.32 basic and diluted.

Further, nil payment of cash dividend, bonus shares and right shares was agreed.

Dynea Pakistan Limited was incorporated on June 20, 1982 in Pakistan as a public limited company under the Companies Act, 1913 and is listed on the Karachi and Lahore stock exchanges in Pakistan. It is engaged in the manufacturing of formaldehyde, urea/melamine formaldehyde and aminoplast compound.
The associated companies include: Shabbir Tiles Ceramics Limited and Agriauto Industries Limited. The symbol “DYNO” is being used by the stock exchanges for the shares of Dynea Pakistan Limited.

Financial results of Kohinoor Energy Limited for period ended September 30, 2015

Karachi: Kohinoor Energy Limited informed Karachi Stock Exchange about recommendations made by the board of directors in the meeting held at Lahore on October 27, 2015.

The agenda of the meeting was discussion of un-audited interim profit and loss account for three months period ended September 30, 2015 which portrayed a profit of Rs. 162,122 and earnings per share 0.96 basic and diluted.

Further, nil payment of cash dividend, bonus shares and right shares was agreed.